deburrerHole Deburrer

Drill bits tend to leave a burr, or ragged edge, as they drill through metal. This edge must be removed for sheet metal parts to mate properly. A hole deburrer is used to smooth these ragged edges. Sometimes the deburrer cannot reach a hole. It is possible to deburr a hole with an oversize drill bit twirled between the fingers.

swivel deburrerSwivel Deburrer

The swivel deburrer can be used to remove a burred edge from the inside of a very large hole or along the external edge of a piece of metal or plastic.

edge deburrerEdge Deburrer

This tool can quickly remove the rough edge from a piece of sheet metal.

Next — Nibbler

Go back

AnglefinderBending BrakeBuilding LogClecosDeburrersDrillsDrill BitsFlutersHammersHolefindersHole FlangerLanding Gear InstallerMarking GaugeMetal SnipsNibblerNicopressRiveterRulesSamplesSeamersTools home